View Single Post
  #12  
Old 03-18-2016, 04:04 PM
Kevin Kuehn's Avatar
Kevin Kuehn Kevin Kuehn is offline
Workin' Late Again
 
Join Date: Jan 2011
Location: WI
Posts: 3,976
Quote:
Originally Posted by dtvmcdonald View Post
Look at that focus control circuit. Its as bizarre as I have ever seen in one of these old TVs!

It simply changes where some current goes off to a modest amount of drain, e.g. the audio output screen. Not a lot of range. In the process it changes the voltage on the CRT cathode and grid in sync.


Which end of the control are you at?
Also the plate current, which flows through the primary of the output transformer. Sams schematic shows the speaker plug disconnected, so it looks like only the screen draws current. The audio output cathode current(screen and plate combined) also sources the IF's, video, and sync circuit. So really all those circuits combined are pulling current though that focus control. As crazy as it looks, the design was an efficient use of power.

Last edited by Kevin Kuehn; 03-18-2016 at 04:24 PM.
Reply With Quote