View Single Post
  #9  
Old 03-13-2016, 02:23 AM
Eric H's Avatar
Eric H Eric H is offline
Administrator
 
Join Date: Jun 2002
Location: So. Calif
Posts: 11,565
I've got this set almost back together, this was just suppose to be a quick finish up to a job I started 15 years ago but it turned into a major project.

Besides removing, cleaning and replacing the flyback I had to swap out the broken CRT socket, the antenna/ac interlock assembly and the volume control/switch with parts from a spare chassis. I also redid some wiring in the power supply area with better wire, I redid it years ago but used Belden automotive wiring that wasn't rated for the voltage involved.

It looks pretty nice, I still have to put the Hotpoint emblem on the front and install the back. It's picked up a scratch or two since I painted it all those years ago but they are minor.

The second picture is what it looked like when I got it, it had been painted white with a brush and some house paint, they were really sloppy and got it on the knobs and the screen too, the cord was also painted white so I soaked it in some TSP and scrubbed it clean with a wire brush.

This set has a UHF tuner, the dial for it is underneath the clear fine tuning knob, the fine tuning knob is also the UHF tuning knob, you just turn it beyond where the VHF fine tuning range and it adjusts the UHF through a Rube Goldberg string setup, it really seems like an afterthought on the part of the designers.

Attached Images
File Type: jpg 17S-2.jpg (64.4 KB, 55 views)
File Type: jpg hotpoint.jpg (7.0 KB, 24 views)
File Type: jpg hotpoint-cord.jpg (25.2 KB, 22 views)
Reply With Quote