View Single Post
  #2  
Old 03-03-2016, 06:22 AM
jmetal88 jmetal88 is offline
VideoKarma Member
 
Join Date: Jan 2008
Location: Derby, KS
Posts: 252
Quote:
Originally Posted by kf4rca View Post
Too bad about the Syncmaster. I fixed one once and it was a shorted (melted down) width coil.
I have found that if you have problems getting good purity and /or convergence on a CRT, its usually due to a slipped shadow mask. Usually resulting from a fall.
Sometimes the cabinet cracks and sometimes it doesn't.
Yeah, that could be what happened. When I got it, there was a small chip on the base and an abrasion on the face of the CRT, so I wouldn't doubt if it got dropped at some point.

The place with the replacement CRT never e-mailed me back, so I'm not sure what's going on with them.
Reply With Quote