View Single Post
  #8  
Old 02-18-2016, 11:30 AM
dieseljeep dieseljeep is offline
VideoKarma Member
 
Join Date: Jul 2010
Posts: 7,562
Quote:
Originally Posted by zeno View Post
If the pix is just dark but otherwise good & sharp with good
B&W try moving the G-2 ( a.k.a. screen ) control a little first.

G-2 is on CRT socket. Circuit simple, flyback pulse rectified by
D604 ( apx 300 VDC ) goes to one end of control. Other end
a 1 meg R681 to ground.
CRT pin 8 should be abt 250 VDC.

The 3 cathodes pins 1, 6, & 7 should be abt 75 V. if they
are much higher you have a video problem.

73 Zeno
I just wonder if the board has the low value 'lytic in the screen circuit, 10mfd @ 315vdc, that might be bad. I don't know if the cap is on the CRT board or on the main board.
Reply With Quote