|
Is the 1.5 ohm resistor in series with the 1V2 ok?
Well, its not open!, at low test voltage. I can measure it in
series with the flyback winding. I can't get to it as its buried under the
blog of (presumably) wax. It could have problems in use. That might do it.
As I said ... should I remove the wax (?) blob?
******************
OH! I just realized something ... due to tehe way the circuit works, I could remove the
rectifier and install a semiconductor "stick" directly between the HOT plate cap
and the nealby CRT anode. Were do I get such a thing? Remember the HV is 5 to 7 kV,
but I presume one for 15 or 20 kV would work.
Last edited by dtvmcdonald; 01-27-2016 at 02:48 PM.
|