View Single Post
  #11  
Old 01-21-2016, 11:39 AM
Ed in Tx's Avatar
Ed in Tx Ed in Tx is offline
Zenith Walton My 1st TV
 
Join Date: Nov 2008
Location: DFW
Posts: 1,421
But before you decide the head switching is off, you need to make sure the cylinder servo is correct because it affects the switching point.

If I had the schematic for the head servo and the capstan servo ICs, there is a pin on each IC that should be very close to 4.7 V when the servos are correct.
Reply With Quote