View Single Post
  #4  
Old 12-15-2015, 10:00 PM
Findm-Keepm's Avatar
Findm-Keepm Findm-Keepm is offline
Followin' the Rules...
 
Join Date: Jun 2007
Posts: 2,857
I couldn't find the manual, but I do have the Sencore Speed Aligner Work Shop manual, with step-by-step instructions on how to use the speed aligner on a set. They use an Admiral K10 chassis as the work example, and cover all of the pads and detector probe, as well as the BE156 Align-O-Pak bias supply.

The manual has a springy fold, so I'm flattening it out tonight and can scan it tomorrow either at work or here. It's hard to manhandle on the scanner and keep it straight, so hopefully it'll flatten out tonight.

Here's a relevant thread on the speed aligner:

http://www.videokarma.org/showthread.php?t=246891

Scan of the workshop manual coming tomorrow....
__________________
Brian
USN RET 22YRS (Avionics/Cal)
CET-Consumer Repair and Avionics ('88)
"Capacitor Cosmetologist since '79"

When fuses go to work, they quit!
Reply With Quote