|
ok, I measured the voltages of the horizontal afc/osc tube and there are some issues there. Here are the voltages I got compared to what the sams says they should be.
pin # sams what I measured
1 225v 224v
2 -.2v 3.5v
3 80v 38v
4 and 5 are filiment
6 140v 19v
7. 2.5v 4.3v
8 .1v .16v
9 60v -50v
So clearly something is wrong in the horizontal hold circuit. I linked the relevant part of the schematic earlier in the thread to those interested, I qill start double checking components and making sure I didn't put a wrong value component in.
|