Fine for quick test, be sure its a 200V +
The temp rating is important on these, dont remember but
I think they were 85 deg C.
Our cap expert is probably reading the mail but hasnt piped in yet.
Was too common for a lazy tech to use the wrong thing just to
get it out & save buying a part. Could tell lots of stories about
the butchers in the biz that made us look bad......
73 Zeno
Quote:
Originally Posted by maxm
I took at CH8, it calls for a 350uf @ 200V. The replacement cap previously installed was 300uf. I took it out and it measured around 130uf. All the extra caps I have to substitute are lower values except for a 500uf. Could I use the 500 to test briefly?
|