Set has Panasonic chassis. Cabinet probably US. CRT
could be anything, need the EIA code. They were good
sets.
It has UHF. All US sold sets HAD to have UHF after March 1964.
Used a one knob selector with presets for UHF. Has a
varactor tuner.
There are two common lytic failures about this time.
One was the 4.7 mfd in the 200V supply. They go on
almost every brand set from the late 70's on. Its usually
near the FBT. Causes jail bars, shading, too brite pix,
poor pix.
The other is a 4.7 in the power supply area. Its the filter for
the negative supply to the tuner for band switching.
Causes hum bars on LOW channels only (2-6) & a messy pix.
73 Zeno
