View Single Post
  #122  
Old 10-24-2015, 10:56 PM
Findm-Keepm's Avatar
Findm-Keepm Findm-Keepm is offline
Followin' the Rules...
 
Join Date: Jun 2007
Posts: 2,857
Quote:
Originally Posted by Captainclock View Post
..... generally tube tester charts don't put the letter suffixes after the tube designation because they're all the same tube just different heater warmup times.
Not so - the 3A3C is an improved type with reduced X-ray protection. Heater characteristics are the same as the 3A3. The glass and plate were improved for better X-ray protection, much like the 6BK4 upgrade to the 6BK4C/6EL4

Electrically the same for tube testing, but with most testers putting only about 100V across the tube, not a conclusive test. We checked HV rectifiers with GE's suggested circuit, also used for Focus rectifiers - you can't check them accurately without a fairly high voltage.
__________________
Brian
USN RET 22YRS (Avionics/Cal)
CET-Consumer Repair and Avionics ('88)
"Capacitor Cosmetologist since '79"

When fuses go to work, they quit!
Reply With Quote