Quote:
Originally Posted by Dubis7
I've heard 1N4001 is generally more than acceptable.
|
Service manual shows a 1N1007 which is a germanium type rectifier which I would assume that the silicone equivalent to that would be the 1N4007 but not sure, anyways I'll have to look into the 1N4001 as well. but also I do need to figure out how to repair the HV pin on the picture tube socket because its broken it was apparently previously broken but was being held together in the picture tube socket but then when I went to take the back of the picture tube socket apart to check the HV pin to see if it needed to be cleaned or something and went to pull it out of the retaining hole that's when I figured out that the HV pin socket was broken. any ideas as to how to fix it? would just soldering it back together be good enough?