Quote:
Originally Posted by Electronic M
It still looks like low B+ to me. Shrunken H and V (to that extent) usually indicate low B+. Low B+ can be caused by things other than lytics too....Check your B+ against the schematic.
The rolling is probably synch....Which also will go screwy if B+ dips too low.....A bad PS will usually affect (not always noticably) most to all other circuits.
|
I agree 100% - looks like an open input filter in the B+/doubler.
B+ can cap(s) (100-160uF typical) need replacing.
__________________
Brian
USN RET 22YRS (Avionics/Cal)
CET-Consumer Repair and Avionics ('88)
"Capacitor Cosmetologist since '79"
When fuses go to work, they quit!
|