View Single Post
  #12  
Old 10-22-2015, 08:21 AM
ZackN920's Avatar
ZackN920 ZackN920 is offline
VideoKarma Member
 
Join Date: Jul 2014
Location: Stephenson County, IL
Posts: 242
Well, I had some time yesterday to poke and prod around with it. Found that everything attached to the back of the fly is good, but tapping on the HV tube would intermittently bring the pic back and off again. There's also a slight chance at a breakage in the wire going from the top of the HV tube to the flyback as well, because it came back when I played with that some.
I still havnt found where that snap comes from. It will only do that (and sizzle) when the CRT is lit. It did it once in the first 10 minutes but I didn't see it and it wouldn't do it again in 30 or so more that it was on.
I think though, that my sizzle may be corona...(on the crt)I'm not sure why because the anode connection was clean, but that's where it sounds like its coming from when the back is off.
I was also wondering, can a HV rectifier tube cut out intermittently and be linked to my issues. When I had it out of the set there was a chunk of something that was just flopping around inside as well...

Last edited by ZackN920; 10-23-2015 at 11:04 PM. Reason: Missed a few things when first posted
Reply With Quote