Quote:
Originally Posted by MRX37
I think the no signal box looked very slightly distorted. Attached is a picture of it. It's about twice as big as it should be.
Also noticed that when turning the brightness knob up, the image blooms out even more and shrinks when i lower it. Definitely low HV. question is... is it a bad rectifier tube, a bad damper tube, a bad flyback or a bad yoke?
Or something else?
|
You have full width so 95%+ chance its the 3AT2. I learned
many years ago NEVER say 100%.
You can 99% eliminate yoke, FBT.
Tiny chance its the damper or hoz out. H out are almost
always VERY expensive.
73 Zeno