View Single Post
  #116  
Old 10-13-2015, 04:30 PM
MRX37 MRX37 is offline
VideoKarma Member
 
Join Date: Aug 2005
Posts: 1,579
Quote:
Originally Posted by DavGoodlin View Post
It may be shorted by the look of those voltages unless you have E and C mixed up.
I obtained the voltages by testing one pin at a time, using chassis ground for the DMM's negative lead. The transistors has EBC labeled for the pins. I doubt I messed up the order.

Pulled the transistor and tested it using the diode function:

Collector to base: voltage going one way but not the other.
Emitter to base, same reading. Voltage one way but not the other.
Emitter to collector, no reading either way.

Edit: transistor for the 1st video amp tests the same way.

I have a new 12HL7 coming in the mail. Should have it by Monday. See if popping that in makes a difference.

Last edited by MRX37; 10-13-2015 at 04:40 PM.
Reply With Quote