|
yes, but that doesnt tell you much, if the tubes light up, the heaters are obviously good.
more informative would be measuring the voltages on the tubes, to see if they are in the ballpark. Trouble with those stages should show up in weird readings. Folks on here should be able to interpret the results and tell you what to test next. A good filament also does not mean a tube is good overall. Just that the filament is OK. all the stages in the horizontal section, HO output tube, H. Oscillator, Damper, and HV rectifier all work together to generate HV, and all stages need to be within spec. One leaky cap or shorted flyback winding can kill the picture, or let out smoke...
|