View Single Post
  #99  
Old 10-07-2015, 06:20 PM
rca2000's Avatar
rca2000 rca2000 is offline
VideoKarma Member
 
Join Date: Mar 2003
Location: cincinnati,ohio
Posts: 2,090
Looking at sams for D-12-8. VERY likely to have same video layout as yours.

in FACT...I SEE 2 of the resistors now..

R65..next to l-15--left side of that coil--L-15, maybe in FRONT of it..

R-70--in FRONT of 12HL7 tube--to the RIGHT of it..

R-61 is on SS board--FRONT of set...behind a little black transistor..

Your delay line is M4...should be on the side of the board with the 12Hl7. If it is open or shorted...it WILL kill the video..and NOT overload anything. Check it..it COULD have been broken off or such. if OPEN...you CAN bypass it--it's purpose is to delay the video a few microseconds...to ensure it does not get to the CRt before the chroma--which takes longer to process. If bypassed...it will NOT look quite right...but WILL tell you what you need to know...

Last edited by rca2000; 10-07-2015 at 06:35 PM. Reason: add. info
Reply With Quote