View Single Post
  #93  
Old 10-07-2015, 02:22 PM
zeno's Avatar
zeno zeno is offline
VideoKarma Member
 
Join Date: Mar 2013
Location: New Hampshire
Posts: 4,918
When you turned off the set it was brite white for
a sec so lets assume the CRT is OK
G-2 ( white w/ stripes ) are OK so boost OK
G-1 ( yellow ) are high BUT they only carry color info.
Cathodes ( solid colors) high, should be abt 140 VDC. This is the B&W
info. Cathode high= pix dark. Cathode low = brite.
Measure the 12HL7 voltages. Count pins CW from under, CCW from top.
Usually you can get it from the top. Bias is in color part but try anyhows also.

73 Zeno
Reply With Quote