|
OK...others here will have to help me...but...
That 800+ volts tells me your B boost IS working ok. With that lrvel of voltsge...you SHOULD have enough screen voltage..
HOWEVER.....some OTHER voltages seemed HIGH to me. If you are getting over 300 volts to the CATHODES of the tube...it will likely be in CUTOFF... that is where I need help...not sure which leads go to the cathodes. But IF your cathodes are biased too much positive...there will NOT be much emission.
On a SS set with combined Y-C at the tube--...one could "force on" the cathode of a particular gun and then see if the tube would flare to retrace of that color. If it DID...and the raster was pretty bright of that color...it would usually rule out the CRT---for a symptom of no/low brightness..
But on a DELTA gun tube on a TUBE set...not really sure HOW one could do this. Perhaps someone else knows...
|