View Single Post
  #85  
Old 10-07-2015, 12:06 PM
MRX37 MRX37 is offline
VideoKarma Member
 
Join Date: Aug 2005
Posts: 1,579
Quote:
Originally Posted by zeno View Post
A video would help. Do it on youtube so everyone can
see it EASILY.

After the video try this:
Put all the G-2 ( screen) and the 2 drive controls to mid
range. Measure the CRT voltages.
Usual wires are solid colors, white /w tracer, yellow w/ tracer.
three of each.
DO NOT DO THE FOCUS its the black wire set apart.
Dont bother with the filament, twisted pair of brown.
Post results.

73 Zeno
You mean like the one I posted in this thread yesterday?
http://www.youtube.com/watch?v=emRtk...ature=youtu.be

Not sure what else to make a video of.

Okay I set the screen controls to about mid way and I've measured all the wires on the CRT socket except for the black wire, and the brown ones.

White wire/blue stripe Over 500 volts
White wire with red (brown?) stripe 800+ (cut power at 866 volts)
Yellow wire with red stripe: Starts off at 350 volts, drops to around 330 when the set warms up.
Green wire: Starts off at 360 volts, drops to 180
Yellow wire with blue stripe: Starts off at around 335, drops to around 325
Dark blue wire (violet?) starts of at 330, drops to 170
Third yellow wire with dark stripe (not sure of stripe color): starts of at 350, drops to around 330.

and rca2000 I would love to check the CRT. Do you have a tester I can borrow?

Last edited by MRX37; 10-07-2015 at 12:09 PM.
Reply With Quote
Audiokarma