HV rectifiers often dont light. they just need a little heat
to emit. Usually a weak rectifier causes "blooming".
As you turn up the brightness the pix expands like zooming,
the brite drops & the focus gets worse. HV regulation can do it to but not
as bad. For now try this.
Turn up the R, G, & B screen ( G-2 ) controls one at a time then
return them to where they were. You should get a brite pix
from each one. The CRT is magnetized so the colors will be blotchy.
73 Zeno
Quote:
Originally Posted by MRX37
I just had the set on, lifted the flyback cage door and did not see a glow from the tube that it plugs into.
Also cleaned all the switches, no effect.
|