Quote:
Originally Posted by zeno
D12 was a good chassis.
Usually tripping breaker is diode in bridge shorted.
If one is bad change all four.
If there is no loud hum then it may be just a weak breaker.
If it breaks after 2 or 3 mn look tward hoz out / hv area.
All of us looking forwards to working on it with you.
73 Zeno 
|
Ah, there is a loud hum for the split second that it operates.
I'm not familiar with changing out diodes, apart from knowing that they go in one way and their basic function is to limit current to flowing only one way. Is there a specific rating scale for them like resistors or capacitors? Can I substitute diodes from one of the various TV chassis boards I have lying around?