View Single Post
  #2  
Old 09-22-2015, 09:31 PM
Tubejunke's Avatar
Tubejunke Tubejunke is offline
VideoKarma Member
 
Join Date: Apr 2003
Location: Martinsville, VA
Posts: 1,823
Quote:
Originally Posted by Username1 View Post
Not knowing what's going on here..... All I can say is tubes generally
don't have grid current..... They have plate, and cathode current....

.
I want to see if I can get this right. There is normally a grid bias voltage which is usually negative with respect to cathode and placed between the cathode and plate in a basic triode to control current. That current would normally be measured between cathode and plate.

That I feel pretty good about but I really never thought about the flow of current there (if any) unless there is a problem with the tube. Is the original poster saying that he had no grid leakage on the tester. Which would be good. Right? Checking my own knowledge....
__________________
"Face piles of trials with smiles, for it riles them to believe that you perceive the web they weave, and keep on thinking free"
Reply With Quote