|
"should I cut the tension band or mounting hardware on a 25GP22?"
Do not cut the tension band !
The tension band provides implosion protection for the tube by placing the front panel of the tube in compression. Tension is likely on the order of 1000 to 1500 lbs. Without the tension band, you have a very unsafe condition, a tube that could implode easily. It is unlikely that you have the tools to re-band the tube after changing/removing the corner ears, so the tube will continue to be a hazard even when installed in the TV set.
Cutting off the ears is a less hazardous operation, but not risk free. Wear a "flack jacket" and full face mask, and be sure your neck is protected.
jr
|