|
Check the solder connections on the transformers mounted on the PC board below the yoke and convergence plugs. Many a strange problem on these chassis is a cold solder joint
Given your clues, it may also be a capacitor section, possibly one on a lower supply voltage to the IF-Tuner
Looking for slider knobs. They were brittle and break if slider was not cleaned. We used Lube-a-trol' possiby same as DeOxit "fader lube"
__________________
"When resistors increase in value, they're worthless"
-Dave G
Last edited by DavGoodlin; 09-14-2015 at 11:27 AM.
|