Here's my perfectly not burned and happy looking flyback! Looks almost brand new after a quick and very careful cleaning so as to not damage the thin wires. Why's weird is my high voltage anode wire looks like it was white. Was. But now it's stained with the lives of millions of dust particles from decades past.

(That's the wire is the bottom right)
Well it doesn't look damaged. If it was I'd order at least 15-20kv rated wire. If the anodes voltage is 10.35kv normally this allows me much safety headroom for if it was high. It don't have any equipment to test that high. Most I got is a vintage Laffeyette TE-12 multimeter at 6kv. But I wouldn't even feel safe at that voltage. Learned from my grandfather, well not really but known as that for most of my life. That's why they went from 6kv to 1kv highest setting on multimeters. The meter could handle it but not the leads. Makes sense. And there I'm going with the babbling again.