Quote:
Originally Posted by dieseljeep
I think if every one of us could turn back the clock, we would! It's bad enough, I'm living in the past, as it is. Video tapes, music cassette tapes of big band swing, vacuum tube amps, turn tables and LP records.
Getting back to the Zenith, it's one with the two-tone beige cabinet, in good condition.
That poor Motorola was bad luck for every one of us. First of all, the implosion on your part. I bought it and bought a conversion kit on the Eplace, half the parts were missing, as those parts were used in a conversion job.
Then I get brilliant idea, that I'm going to get a rebuilt 23EGP22 and keep it original. I bought one that was acquired from the Moyer's stock, by VDC.
It looks like it went to air when they had it. It seems like it was a bad weld, when it was rebuilt. I kept the CRT, as I think it can be re-gunned.
The least thing, is the one that sold it to me, could've checked it. 
|
Excellent! Glad you still have that Zenith portable.
That Motorola was indeed bad news from the start. Its as though the set doesn't want to live. It had the most flawless picture on it when looking beyond the cataracts and I did everything so carefully and that CRT lit up in my face... I don't regret having attempted the repair though because that CRT had cataracts that covered everything but the center 10" of the screen; it had to be done if one wanted to use the set. In fact, when Scotty was still rebuilding CRT's over at Hawkeye, I once asked him about 23EGP22's and he said those tubes are a total nightmare to rebuild. I specifically remember him telling me that over half of the ones he'd attempt to rebuild would implode when he put them in the vacuum oven and that they would often implode when they would cool down and glass would go flying throughout his shop. He said if I ever wanted a 23EGP rebuilt that it would be double the cost of the regular CRT assuming it would make it out in one piece. I never went though with it.
But as for the Zenith portables, as Zeno said, sound can be tricky on these. They usually come back loud and clear with a touchup of the quadrature coil and the buzz control. Zenith's were hard on the 6Z10/10Z10 audio outputs like an RCA is with 6GH8's, so it's always important to have a good one of those in there prior to adjustments. I always was fascinated by the two pole convergence on the little sets. The CRT was small enough that geometry correction was simple enough to combine both red and green in the same circuit. The '68 portables using the 15Y6C15 had the "upside down" CRT, and used the typical 3 pole convergence in those. The CRT was inverted so the blue convergence magnet wouldn't physically interfere with the tight space limitations required for the big convergence panel in those sets.
__________________
I tolerate the present by living in the past...
To see drh4683's photo page, click
here
To see drh4683's youtube page, click
here