View Single Post
  #3  
Old 08-29-2015, 07:48 PM
SwizzyMan's Avatar
SwizzyMan SwizzyMan is offline
Restoring an admiral c322
 
Join Date: Apr 2015
Location: Side Lake Mn
Posts: 886
Hmmm that is definitely odd that cap is there. Maybe it is indeed original out of the factory but it just isn't listed in the schematic because it may be a possible revised model. Or maybe the meter wasn't working properly so a repairman threw it in there. Either way, it is a cap that commonly goes bad. You should replace it because the meter may not function properly without it and then you couldn't rely on the unit. So yes, replace that one and all other ones that look similar to that one e.g the paper caps and the electrolytic caps if they are there. Also looks like you are missing a tube from what I see in the photo. Did you take it out for the photo? One more thing i'd replace those 10k resistors just in case they have started to drift and they can get worse just with time and with use. Better safe than sorry.
__________________

Admiral C322C2 Regent (Restoring)
RCA CTC-7 Pensbury (Restored)
RCA CTC-5 Westcott (Restored)
CRA CTC--4 Director 21 (Restoring)
Reply With Quote