View Single Post
  #6  
Old 08-26-2015, 01:41 AM
ppppenguin's Avatar
ppppenguin ppppenguin is offline
VideoKarma Member
 
Join Date: Oct 2009
Location: London, UK
Posts: 466
I remember the Ferranti ZNA134 and ZNA234 chips. For 625 the xtal frequency was a realtively standard 2.5MHz. There were also the Philips SPG chips; the SAA1043 which really needed a bit more than 5V to work properly and the later SAA1101. I've played with all of these over the years, including designing the SAA1043 into a broadcast grade SPG.

I've not played with PIC, Arduino or Raspberry Pi etc but I reckon you could make a pretty good job of a simple pattern generator with a PIC and a few resistors. The resistors would be arranged as a R-2R DAC. The Domino 625 to 405 converter used a couple of PICs as its main timing logic.
__________________
www.borinsky.co.uk Jeffrey Borinsky www.becg.tv
Reply With Quote