View Single Post
  #12  
Old 08-18-2015, 04:50 PM
drh4683's Avatar
drh4683 drh4683 is offline
VideoKarma Member
 
Join Date: Jan 2003
Location: Chicago, IL
Posts: 2,094
Quote:
Originally Posted by Findm-Keepm View Post
Why are the julian dates on modules / brackets AFTER March 5th? One module has a julian day of 4083 (March 24th) and the bracket above the remote channel indexes shows 4074 (March 15th). The final chassis stamp to the right of the fly shows 4102 day, or April 12th, 1974.

We used the julian day on the modules as a "serial number" when selling rebuilt modules - a tactic stolen straight from Zenith.

Zenith used internal julian dates on assemblies, and of course individual parts were marked IAW EIA procedures. The transformer was made the 10th week of 74 (March 3-9), so kinda tough to get it across town to Zenith and through all the wickets by the 5th...

I'll try to find the training manual that explained the date markings on Zeniths - it's around here somewhere.
Great points and observations. With that being said, this proves that the RUN number does NOT indicate the final build date of the set, but rather build date of the chassis "core" itself (parts that get permanently mounted and soldered to the chassis). This makes sense since the RUN number is printed on the chassis serial tag only and the serial number on the tag matches that of the number stamped into the chassis. Thus we're only talking chassis production here, not the date the set was actually built as I incorrectly stated before. The power transformer, being a component that would have been mounted when the chassis was built shares the same 10th week of '74 code like that of the RUN number, so that tranny was hot off the assembly line when it got mounted. Therefore, a power transformer should never have a date newer than the RUN number for an original set. Separate plug in components and sub assemblies such as the duramodules would have been installed at a later date and built in other plants, hence why those dates differ. From what I can see, the latest Julian date within this set is 3434102 (343 being the EIA code for "Zenith") which I also see on the convergence panel as well. The most accurate date when trying to estimate final TV build date is probably the Julian code that gets printed next to the chassis number ink stamp as it probably depicts the date in which the chassis was truly finalized with all sub assemblies installed. So with all of this being said, our best estimate with the info we have is that this set was probably built sometime in or around mid April, 1974.

I would really enjoy seeing any supplemental information you might have.
__________________
I tolerate the present by living in the past...
To see drh4683's photo page, click here
To see drh4683's youtube page, click here

Last edited by drh4683; 08-18-2015 at 05:38 PM.
Reply With Quote