View Single Post
  #20  
Old 08-05-2015, 10:56 AM
jr_tech's Avatar
jr_tech jr_tech is offline
VideoKarma Member
 
Join Date: Sep 2009
Posts: 4,573
Quote:
Originally Posted by Tubejunke View Post
Anyway, that alligator clip you mention sounds like it was clipped to the rigid wire that presses against the side of the CRT to discharge the high voltage from the CRT during service. That bare wire is actually part of the HV circuit as much as any other wire. There is conductive paint on the CRT called agadag (spelling?) and the sprung wire must touch the CRT surface to complete the circuit. Always make sure that is touching the rougher aquadag surface and not just glass where a hole has formed.
In this case however, the CRT is a 16GP4, which is a METAL CONE CRT. The *whole* cone is connected to the HV, and a "doorknob" capacitor (mounted on the front of the HV cage) is used for filtering. I suspect that the clip-lead was left there for convenient grounding of the metal cone while servicing the set.

jr
Reply With Quote
Audiokarma