View Single Post
  #29  
Old 07-20-2015, 02:43 AM
Tubejunke's Avatar
Tubejunke Tubejunke is offline
VideoKarma Member
 
Join Date: Apr 2003
Location: Martinsville, VA
Posts: 1,823
Quote:
Originally Posted by NoPegs View Post
However when checking caps > 100WV I pop open the Solar first, and only if the Solar seems to think it's ok do I turn the 879B loose on it.
I have to hand it to Solar. They made one heck of a good product; at least in their CB1-60(?) I think that's the right no. The most common one. Anyway, I have bought several Heathkits, a Knight, and the Solar. Out of everything there is some need for repair, or in the case of the Knight total rewiring of the multi-function switch. The switch is actually assembled wrong it and the hot shaft terminal is covering the wrong stuff at the wrong time. Lots of mistakes in the these because the were kits.

Anyway,THE SOLAR! Solar rules! Everything on that unit functions as it should and well! Looking inside for hot stuff and prior repair damage I found that at some point like probably the 60s someone tacked in a dual outlet 10mfd with a second in SERIES with one of the two 10mfds (sometimes 8mfd) in the power supply. That gives you what 5mfd and double the working volts. I need to find a schematic and see what is called for because 5 is low. I don't know what effect it would have, but those are almost always 8 or 10mfd

No real concerns other than a noticeable buzz in the transformer, mostly in the first 15 min or so. Nothing is hot. I jumped over the 10mfds individually just to see what may change. Nothing did. There is evidence that the transformer has run hot at some point. It just looks like it is missing a little wax AND there is an oily stain in the bottom of the box. It probably all has to do with why the power supply stuff is all that has been touched.
__________________
"Face piles of trials with smiles, for it riles them to believe that you perceive the web they weave, and keep on thinking free"
Reply With Quote