|
There is not much more to show than what is already posted.
Look earlier in the thread.
You are not getting a photo of the current underside of the TV
power chassis! First, I forgot to take one before installing it
in the cabinet. Second, some people might puke if they saw it,
all those triples of modern Allen-Bradley style 2 watt carbon resistors
replacing the originals. I had to buy the type of resistors that
our EE department storeroom stocked since I wanted them
in a hurry. I could post a picture of the removed (and 30-50% high resistance) originals.
Its not ready for a frontal shot, running, as the knobs for
it were only put "in the mail" yesterday.
There is no back.
However, I should and will post a picture of the HV
connector I built for it. As I said, I have not run a lathe for
somewhere between 15 and 20 years [dedicated to the
memory of George Pisello who taught me], but it turned
out quite nice. There was lots of work with a boring bar.
I will also post a picture of the HV rectifier running in
the perforated sheet metal cage I made for it.
|