|
Oh yes, one more question.
I took the radar tube out of its box and examined it.
I was told that it had an outer Aquadag coating, forming the
filter cap usual on later TV CRTs.
I notice no such coating. The front 2/3 of the bell insides
is aluminum coated, the back 1/3 and a couple of inches
back into the neck is Aquadag coated on the inside ...
but no Aquadag on the outside. I even tried scratching a bit
off at the edge with my fingernail, nothing came off.
If you've used one of these, was it outside coated?
|