Quote:
Originally Posted by zeno
It has a vertical problem or the vert is way out of
adjustment. Start with the vert osc / output tubes.
It may be all in one tube. Do not believe the checker 100%.
They lie almost as much as a politician. If not a tube recap JUST
the vertical one cap at a time followed by a test. Dont change
disc caps unless cracked or burned. They almost never go.
Also check resistor values.
I cant tell but if you have snow & a waterfall sound from audio
it will probably work to some extent. At this point the CRT seems fair,
probably as good as you will find for what it is.
73 Zeno 
|
It does have the "snow and waterfall" sound coming out of the speakers and I had a converter box hooked up to it and it was receiving audio and video loud and clear just the picture was scrunched like you see in the picture and the vertical and horizontal hold was being screwy.
For some reason when I would try to adjust the vertical or horizontal hold knobs it would darken the screen if I went too far to the left or right with the knobs (it was more pronounced with the Horizontal Hold Adjustment than the Vertical Hold Adjustment.)