Quote:
Originally Posted by bigaudioal
Hey, I cannot seem to find a TVS with the correct specs on Mouser. Can you help me out? Looks as though I should be looking for one with a clamping voltage from 8.2-8.9v. They all seem to have clamping voltage specs higher than this.
I am thinking this one would be fine (standard 1.5KE8.2CA diode), except the clamping voltage is listed at 12.1 V.
http://www.mouser.com/ProductDetail/...HrLgImFOKf8%3d
|
This diode is an industry standard 1.5KE8.2CA diode available for about 35 cents. With this diode in place, the voltage on the filament never got above 7.0Vrms regardless of the line voltage or during a cold start. Here is the cold start filament and plot: