|
my 2 cents.
do a base line run before recap, a 1963 zenith will have a good chance of working as is.
I generally monitor the line current and ramp up pretty fast if all looks good.
If its not a string series set you can pull the horz out tube out of the socket, and variac slowly IF its not been turned on in years. This will give the filter caps a chance to reform vs short out.
I generally will check the B+ resistance (set off) and look for about 8-12k, this points out hard shorts (like vertical out transformers).
I can't imagine any paper caps in a 63 zenith, so at most you may have to do the filter caps, prob an across the line bumble bee.
|