Quote:
Originally Posted by MRX37
Funny thing is I just swapped the tubes back and the picture stabilized. I'm still sure that 6BL8 is bad or at least very weak.
they're pretty cheap on eBay. I might buy one unless a VK'er near me happens to have one they;d like to donate.
|
Or dirty / loose socket or tube pins. Try this. Works real pissah sometimes.
Get a small pair of dikes ( as in wire cutters ! ). Grab the tube pins one
at a time & run the dikes down a few times on each pin. You are
just gently scraping the pins clean. Spray a little cleaner or even WD40
on the socket & put the tube in & out a few times.
There are ways to tighten a socket but with risk.
BTW you can usually tell a bad tube from a socket or pins by GENTLY
pushing on the tube & watching the pix.
I dont know about you but I am having fun working on this old
big M
73 Zeno