|
Thanks for the good advice all!
I lifted 3 of the ones mentioned. A 1.5M ohm that had tested at 14M tests over 20 lifted so is junk. Another that had tested way over before, after lifted, tests good. And the 3rd tests the same.
I'm going to follow most of the advice here. I do know it had quit working 40 some years ago so powering it likely wont work. So I will change the electro's, the one resistor and bad tubes and go from there.
It will be a very slow process but thats fine. i am not only trying to get it to work, but to learn a lot from it, as I have a lot to learn. Thanks again all!
|