|
Well, the re-cap is almost done. and I've found something a "technician" did years ago: installed a 3 amp slo-blo fuse where a .25 amp fast blow belongs, in the horizontal output circuit. No apparent physical damage, and the 6BG6 tests as new. Shorted input cap in power supply, as expected, and all three cans have been re-stuffed. Going to mine a CTC-7 parts chassis for a peaking coil to use until a correct value can be obtained, 620uH to replace a 663uH, with the correct resistor in parallel for now.
Kevin
Last edited by stromberg67; 05-17-2015 at 04:29 PM.
|