|
Ok, well the AGC is a kind of Automatic signal amplifier adjustment, so with
no response from that control, you most likely have - or possibly have some
signal loss along the IF section..... But before we go there, what is the quality
of the sound....? Good full tone, loud, or is it also kind of washed out, and
have some noise in it.....?
First, you should leave the set on, and locate the tubes in the tuner, and IF section
and first, second Video IF and wiggle these tubes in their sockets, tap with a wood
stick the circuit board, or chassis near these tubes, and look for any noise, or
jumping in the picture..... Possibly a momentary better picture....
.
__________________
Yes you can call me "Squirrel boy"
|