|
The focus coil will not necessarily cause the horizontal or vertical to not work. The focus coil in most sets is used as a B+ choke. So deflection should continue to work, unless it goes open and removes power from the correct B+ lines to kill the deflection circuit.
If the focus coil is radically out of spec or not receiving drive current it may be possible to have deflection and high voltage yet see nothing on the screen.
Sets with ion traps, and or focus coils tend to be finicky about the placement there of....If it is not all lined up right you can have HV but nothing on screen. You need a HV probe (a neon bulb could be used to for a crude indication in a pinch), and a test CRT. A test CRT can be used with just the yoke on it's neck to check if the chassis is working properly.
|