|
The HV control does nothing to cathode current, low grid drive, or the -55 volts.
The .01 disc has not been changed but all surrounding paper caps were. Will try that later.
I did try a new H osc tube and pin 2 is exactly -44 v with either one.
I suspect the VDR is clamping too much, since I get almost no waveform there, D14 show 1300v p-p come from the fly via a 560 pf. Need to double check if the fly is installed correctly
I was afraid to pull the VDR out of the circuit totally and get runaway HV, so I will try subbing the VDR with a 5meg pot and see.
__________________
"When resistors increase in value, they're worthless"
-Dave G
|