View Single Post
  #73  
Old 03-15-2015, 08:53 PM
Tubejunke's Avatar
Tubejunke Tubejunke is offline
VideoKarma Member
 
Join Date: Apr 2003
Location: Martinsville, VA
Posts: 1,823
Quote:
Originally Posted by Zenith6S321 View Post
When I first started on my 29JC20, the color would work but then quickly fade away as it warmed up. Is that what you see, or is there no color when its powered up cold?
No, I don't see the former, but I do see the later. My set often (more than not) starts off in pure black and white with the exception of impurities now that my Frigidaire magnetized my tube or possibly other adjustments like purity rings need to be adjusted. Anyway, no color until after quite a bit of warm up. Maybe 20 minutes or so. Once it's there, then it's there to stay normally till I shut her down.

As previously mentioned, I am working with more than one marginal at best tube in the color circuits. That may be the whole thing. I hope so because I want to get this thing stabilized and get my same vintage RCA color dot bar generator hooked up and do her up right!
__________________
"Face piles of trials with smiles, for it riles them to believe that you perceive the web they weave, and keep on thinking free"
Reply With Quote