Quote:
Originally Posted by dr.ido
Disconnect the LVDS cable to the panel, but leave the inverters connected and power it up. Many panels are "white" when off so you'll just see what the backlight looks like. If the backlight looks even with no dark side it's not the tubes or the inverter.
It's hard to tell from the pictures, but I have had panel faults that look similar. It's is usually a tab bond failure. You can remove the frame from the front of the panel and carefully apply pressure to each tab while watching if the image changes. Shim the affected tabs to hold them in position. There are videos on youtube that explain it better. I don't consider it a "real" repair, but it can get some more life out of a panel that would otherwise be scrap.
|
Are the tabs the ribbon cables that I usually see at the top of the panel? I'm not familiar with the term.