Quote:
Originally Posted by Username1
And if DXing is what you want, then a spectrum analyzer is the way to go, I have one,
and when I was getting nothing here, I used it to point my antenna, and find the channels
I was going after....
|
If you are interested only in detecting the DX transmitter rather than trying to watch a program that is a good way to go! I use a slightly different approach, an Icom 8500 communications receiver that I can tune to VHF or UHF frequencies. I put the receiver in "cw" mode and look for the DTV "reference carrier" approx 0.310* mHz above the lower edge of the assigned channel frequency.
Example... ch 12 is assigned 204 to 210 mHz... I hear a nice tone at 204.310 mHz. Using this method, I can find stations that are not showing any signal strength on my DX-friendly Zenith box.
jr
* 0.309440559 mHz