|
I went through the chroma alignment. Only one adjustment needed tweaking. The set came without chassis hold-down bolts so I bought some that seem to do the job ok. I bolted the chassis and tuner in. About half of the plastic knobs snapped in half when I originally tried to pull them off. I used some epoxy for plastics and with some fiddling got them back on. I had to substitute an old knob for the color level control as it was missing. The UHF numbered dial indicator knob is missing. I only plan on using channels 3 or 4 but I'll keep an eye out for one if I can find a picture of what it looks like. I went through purity and convergence again. I still need to come up with a way to hold convergence pole pieces in alignment over the guns. Next I'm going to make mounting plate for a fan to get cool air into the HV cage. I plan to remove the rivet the access cover pivots on, remove it, and screw the fan plate in its place.
|