View Single Post
  #44  
Old 02-17-2015, 09:54 PM
ohohyodafarted's Avatar
ohohyodafarted ohohyodafarted is offline
Bob Galanter
 
Join Date: Sep 2005
Location: Whitefish Bay, Wi (Milwaukee)
Posts: 1,080
I spent the day doing the pre-finishing work on the raw pewter castings. I thought you might like to see what they look like prior to getting the brass plating. Although it is difficult to see, there are 2 studs located in the same location as the original. There will be detailed instructions for mounting that will accompany the parts when you receive them.

I spoke to the plating shop today and they said they are swamped with work and we are looking 5 to 6 weeks out before they can do our job.

And then after the plating is finished, I will still have a lot of work doing the post plating finishing work. Brass plating comes out of the plating bath very dull and must be polished. Brass is not at all like decorative chrome which is nice and shiny right out of the chrome tank. There is a lot of labor involved in decorative brass plating.

And what makes the whole thing a real PIA is, the castings are very delicate and can't take much stress so I am apt to break a bunch of them in the post finishing process.
Attached Images
File Type: jpg IMG_4440a.jpg (40.3 KB, 56 views)
__________________
Vacuum tubes are used in Wisconsin to help heat your house.

New Web Site under developement
ME http://AntiqueTvGuy.com
Reply With Quote