View Single Post
  #3  
Old 02-01-2015, 07:20 PM
stusnyder's Avatar
stusnyder stusnyder is offline
VideoKarma Member
 
Join Date: Nov 2010
Location: northeast Pa
Posts: 486
Quote:
Originally Posted by init4fun View Post
Are you using a modern digital volt meter to take these measurements ?

If so , your readings look fine . If you have a good ol Simpson 260 or other such vintage meter around , I'll bet you find the readings will more closely resemble spec. Remember , our modern DVMs don't load the circuit they're measuring like the classic 260 would , and thus the higher readings .

PS , what did the schematic call out for Input voltage ?

If they listed 110 and your at 116 , that could also explain slightly higher readings ...
I got a simpson, but did not use it. I used a digital. Schematic calls for 117 volts. Maybe I should check with the simpson.
Reply With Quote